Features: Can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc. Zener diodes can also be detected and have a functional self-calibration. After the detection is completed, point the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed. One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector. Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final result will be clearly displayed on the backlit TFT screen. Instead of the usual display, this detector will display the results in color. Specification: Power Mode: Rechargeable Lithium Battery Display: 3.5 x 3cm TFT screen Diode Range: Less than 4.5V Zener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-20V Triac Range: Less than 6mA Capacitance: 25pF- 100mF Resistance: 0.01-50MΩ Inductance: 0.01mH-20H Battery: 0.1-4.5V (with battery) Product chip: High-performance mcu Note: different batches, some accessories are random, 't accept the specified accessories, will not affect the use. Material: plastic colour: White Package Contents: 1 x Multifunctional TFT Transistor Tester 1 x Electronic components set 1 x Cable 3 x Test hook Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Transistor Tester Resistor Test Meter Capacitor Resistor Test Meter