Description: Instructions for use The film on the surface of the steel plate must be removed. Step 1: Simple repair nails, polish the nails with a polishing block to make the surface of the nails clean, and then apply bright oil. The primer should be dried before printing. The color matching must be reversed, otherwise the pattern is not obvious. Step 2: Take out the template and fix it in the template slot, open the printing oil and apply it on the template flower shape you want. The printing oil is applied all at once. After the practice is proficient, you can use nail polish instead of printing oil. Step 3: Scrape the printing oil with a scraper. Painted oil will cover the flower shape of the template. This is a key step. The main attention is to speed and strength. The speed must be fast, otherwise the scraping will not be clean, and the strength must be moderate. If force is too heavy, the printing oil will be scraped off, and if it is too light, the scraping will not be clean. Step 4: Use a round head stamp to print on the template. This step must be fast. The method is to roll from one end of the pattern to another, instead of pressing directly, direct pressing will cause the pattern to be deformed and incomplete. Step 5: The round head stampler will be printed with a pattern, then align your nails and press lightly. A Beautiful pattern will be transferred to the nail. After taking the pattern, it must be printed on the nail immediately, otherwise the printing oil will dry. Step 6: Apply gloss oil again. The beautiful print is perfectly presented. Specification: Size: Stamper: 40 x 29 mm Silicone: 35 mm Scraper: 82 x 52 mm Package Included: 1 x Stamper Scraper Plate Kit