Warm tips: This fan balancing kit is compatible with ceiling fans. Function: The plastic balancing clip helps locate problem areas, and adhesive 5G weights assist in reducing wobble. Permanent weights are secured with a strong adhesive to ensure they remain in place. Working principle: When the fan rotates, the weight adheres efficiently to the fan blade. Advantages: This fan blade balance kit resolves swing issues caused by uneven blades or blade holders. It helps prevent wear on the ceiling fan, reduces noise, and supports fan blades and components to extend service life. Usage steps: 1. Turn the fan on and set the speed to the level where wobble is most noticeable. 2. Turn off the fan and wait for it to stop completely. Select one blade and place the balance clip on the trailing edge, halfway between the blade holder and tip. 3. Turn the fan on and observe if the wobble increases or decreases. Turn off the fan, move the clip to another blade, and repeat the test. Continue testing on all blades, noting which blade shows the greatest improvement. 4. Return the clip to the blade with the best result. Adjust the clip’s position inward and outward along the blade to find the optimal placement for maximum improvement. 5. Remove the clip and attach a balancing weight to the top of the blade along the centerline, near the position where the clip was most effective. 6. If wobble persists, further adjustments can be made using the balancing clip and additional weights. Color: black, silver Material: plastic, metal Package Contents: 4 sets x ceiling fan balancing kit (includes 4 plastic balancing clips and 8 adhesive 5G metal weights). Only the items listed are included. Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error allowance is +/- 1-3 cm.