Beschreibung
Specifications
Electronic:No
High-concerned chemical:None
Type:Heating Type
Repeatability:4 Wires
Measuring Range:4Pcs
Sensitivity:Lambda O2 Oxygen Sensor
Sensor Type:Piezoelectric
Origin:Mainland China
OEM NO.:234-4256 234-4668
Resolution:Oxygen Sensor
car model 1:For Cadillac Escalade Chevrolet Silverado Suburban Tahoe GMC Sierra
Replaces OEM Part Number:
234-4256 234-4668
Fit :
for 2009-2013 Cadillac Escalade V8-6.0 2 Upsteam & 2 Downstream
for 2008-2014 Cadillac Escalade V8-6.2 2 Upsteam & 2 Downstream
for 2008-2014 Cadillac Escalade ESV V8-6.2 2 Upsteam & 2 Downstream
for 2008-2013 Cadillac Escalade EXT V8-6.2 2 Upsteam & 2 Downstream
for 2008-2013 Chevrolet Avalanche V8-5.3 2 Upsteam & 2 Downstream
for 2008-2009 Chevrolet Avalanche V8-6.0 2 Upsteam & 2 Downstream
for 2008-2013 Chevrolet Silverado 1500 V8-4.8 2 Upsteam & 2 Downstream
for 2008-2013 Chevrolet Silverado 1500 V8-5.3 2 Upsteam & 2 Downstream
for 2008-2013 Chevrolet Silverado 1500 V8-6.0 2 Upsteam & 2 Downstream
for 2009-2013 Chevrolet Silverado 1500 V8-6.2 2 Upsteam & 2 Downstream
for 2008-2011 Chevrolet Silverado 2500 HD V8-6.0 Pickup ;2 Upsteam & 2 Downstream
for 2008-2011 Chevrolet Silverado 3500 HD V8-6.0 Pickup ;2 Upsteam & 2 Downstream
for 2008-2014 Chevrolet Suburban 1500 V8-5.3 2 Upsteam & 2 Downstream
for 2008-2009 Chevrolet Suburban 1500 V8-6.0 2 Upsteam & 2 Downstream
for 2013 Chevrolet Suburban 2500 V8-6.0 2 Upsteam & 2 Downstream
for 2008-2011 Chevrolet Suburban 2500 V8-6.0 2 Upsteam & 2 Downstream
for 2008-2009 Chevrolet Tahoe V8-4.8 2 Upsteam & 2 Downstream
for 2008-2014 Chevrolet Tahoe V8-5.3 2 Upsteam & 2 Downstream
for 2008-2013 Chevrolet Tahoe V8-6.0 2 Upsteam & 2 Downstream
for 2008-2009 Chevrolet Tahoe V8-6.2 2 Upsteam & 2 Downstream
for 2008-2013 GMC Sierra 1500 V8-4.8 2 Upsteam & 2 Downstream
for 2008-2013 GMC Sierra 1500 V8-5.3 2 Upsteam & 2 Downstream
for 2008-2013 GMC Sierra 1500 V8-6.0 2 Upsteam & 2 Downstream
for 2008-2013 GMC Sierra 1500 V8-6.2 2 Upsteam & 2 Downstream
for 2008-2011 GMC Sierra 2500 HD V8-6.0 Pickup ;2 Upsteam & 2 Downstream
for 2008-2011 GMC Sierra 3500 HD V8-6.0 Pickup ;2 Upsteam & 2 Downstream
for 2008-2009 GMC Yukon V8-4.8 2 Upsteam & 2 Downstream
for 2008-2014 GMC Yukon V8-5.3 2 Upsteam & 2 Downstream
for 2008-2013 GMC Yukon V8-6.0 2 Upsteam & 2 Downstream
for 2008-2014 GMC Yukon V8-6.2 2 Upsteam & 2 Downstream
for 2008-2014 GMC Yukon XL 1500 V8-5.3 2 Upsteam & 2 Downstream
for 2008-2009 GMC Yukon XL 1500 V8-6.0 2 Upsteam & 2 Downstream
for 2008-2014 GMC Yukon XL 1500 V8-6.2 2 Upsteam & 2 Downstream
for 2008-2013 GMC Yukon XL 2500 V8-6.0 2 Upsteam & 2 Downstream
More adapter models please ask customer service
Package included:
4 * Oxygen Sensor
Note:
1. Please check OEM number before purchasing.
2. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Must Know Before Buying:
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to
changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire
and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
Position confirmation:
Upstream sensor is before the catalytic(cat.) converter.
Downstream sensor is after the catalytic converter.
Upstream oxygen sensor is also known as sensor 1, or pre-cat, or upper oxygen sensor.
Downstream oxygen sensor is also known as sensor 2, or post-cat, or lower oxygen sensor.
When should we replace the oxygen sensor :
How to replace the oxygen sensor :
Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.
Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.
Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.
Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor i
-
Fruugo-ID:
436630182-915143288
-
EAN:
325181263656
Produktsicherheitsinformationen
Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt
Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.
Produktsicherheitsetiketten
Teilenummer des Herstellers:
325181263656
Modellnummer:
325181263656
Seriennummer:
325181263656
Chargennummer:
325181263656
Lieferung und Rückgaben
Versand innerhalb von 3 Tagen
Versand von China.
Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen
