Based on Raspberry Pi 40PIN GPIO interface design, suitable for Raspberry Pi series motherboards Support network communication protocols such as TCP/IP, HTTP(s), MQTT(s), FTP(s) and SSL Supports GNSS positioning and can obtain location information through satellite signals Onboard USB interface can be used to test AT commands, network communications, etc. There are 3 USB expansion ports onboard to facilitate the access of USB expansion devices. Onboard SIM card slot, supports 1.8V and 3V SIM cards Onboard 2 module LED indicators and 4 USB LED indicators make it easy to check the module operating status Onboard resources: 1. USB1 expansion interface supports expansion access of external USB devices 2. USB main interface and power supply interface, which can be connected to windows, Raspberry, and Jetson Nano to expand USB access 3. USB2 expansion interface supports expansion access of external USB devices 4. USB3 expansion interface supports expansion access of external USB devices 5. Type-C, functions the same as USB interface 6. GNSS antenna, supports IPEX1 generation and SMA packaging 7. LTE antenna, supports IPEX1 generation and SMA packaging 8. 4Pin DIP switch, controls the SIM7670G module UART to connect to the Raspberry Pi, uses the pin to control the module to turn on and off and enter the burning mode. 9. 40Pin Raspberry Pi GPIO interface 10. SIM Card slot (this SIM Card slot does not support hot swapping, please turn off the power when replacing the SIM Card) 11. Reserved test points, can be connected to MCU externally to use module resources Due to different batches, the appearance, color and printed words of the product may vary, which will not affect the use. Colour:Blue Material:PCB Package Contents: 1 x Kit