1、CCD digital supplementary light image sensor is specially designed for the research and development of automobile rear view. It adopts digital supplementary light and software technology to provide clear images during the day and high illumination at night. 2、The viewing angle is 170° and the large viewing range makes it safer to reverse. The temperature range of ‑30℃‑70℃ is fully compatible with automotive environmental applications. 3、With reversing reference line (electronic ruler line), the obstacle distance is clear at a glance, digital photosensitive chip processing, the night vision effect is obvious, installed at the rear handle and license plate lights, with self‑tapping screws. 4、After high‑pressure water immersion test and 12‑hour power‑on aging test, and multi‑layer waterproof design, truly high‑pressure washing and immersion waterproofing. 5、The video cable is connected to the display, and the power cable is connected to the power supply of the taillight of the car. When reversing, the reversing monitoring system automatically starts to work, and the situation behind the car can be clearly seen. Item Type: Rear View Camera Material: ABS+Metal Color: Red Brake Light + Black Camera Image Sensor: PC7070K Upgraded Version (Note That It Is HD 7070K, Not SD 1030 and 7959 Solutions) Pixel: 728 x 582 Image Format: NTSC/PAL Diagonal Viewing Angle: 170° Rated Voltage: DC12V Protection Level: IP68 Resolution: 420-700 TV Lines Video Output: 1.0 Vpp.75ohm Signal to Noise Ratio: Greater Than 48dB Current Consumption: No More Than 300MA Power: 1W Working Temperature: -30-70℃RH 95%MAX Storage Temperature: -40-85℃RH 95%MAX Night Vision Distance: Approx. 20ft/6.1m Minimum Brightness: 0.01lux / F1.2 (0 Lux with LED) Lens: 1.7mm Video Cable (with Electronic Trigger Cable): Approx. 6m/6.6yd DC Power Cord: Approx. 1m/1.1yd Fitment: For T5 T6 2010-2017 Camera Wiring Instructions: Black line-reversing light power, yellow line-signal wire Power Cord Wiring Instructions: Black lotus head-connected to the power head of the camera, red line-connected to the positive pole of the reversing light, black-connected to the negative pole Video Cable Wiring Instructions: One end of the yellow lotus head is connected to the camera video port, and the other end is connected to the display video input port (Suitable for: car DVD, car display, other lotus head video input interface display) One end of the red wire is connected to the trigger line of the DVD integrated machine or display, and the other end is connected to the positive electrode of the reversing light Installation Method of Reversing Camera First Step First remove the power supply connection at the vehicle battery and place the removed connection away from the electrode to prevent accidental power-on. Second Step Determine the installation location of the car camera (dedicated) Installed on the license plate holder license plate light position, this kind of installation is relatively easy, just use the small screw provided in the camera accessory to fix the camera on the license plate light position. Through the adjustment of the iron sheet or gasket in the accessories, the camera can achieve the best reversing angle of view. The line of the camera penetrates into the car through the gap of the license plate lamp, and is connected with the power supply of the reversing lamp and the video extension cable. This type of installation type of reversing camera is currently a more popular one, with a more concealed appearance and easier installation. Third Step Connect the power cord of the camera to the power cord of the rear reversing light. Then connect the video cable of the camera to the video extension cable, and connect the other end of the video extension cable to the AV input of the car display. Finally restore the battery power supply, start the car, put the reverse gear, you can see the reverse image on the car display. 1 x Rear View Camera 1 x Power Cord 1 x Bundle of Video Cable 1 x Sticker 1 x Manual